Acu Rite Clock 13020 User Manual

Instruction Manual  
Projection Alarm Clock  
model 13020 / 13026  
180º  
CONTENTS  
Placement Guidelines ............. 8  
Using the Alarm Clock............ 9  
USB Charging........................ 9  
Using the Projector................10  
Backlight Settings..................10  
Troubleshooting ....................11  
Care & Maintenance.............12  
Specifications........................13  
FCC Information ...................13  
Customer Support.................14  
Warranty..............................14  
Unpacking Instructions ........... 2  
Package Contents .................. 2  
Product Registration ............... 2  
Features & Benefits: Sensor..... 2  
Features & Benefits: Alarm...... 3  
Setup .................................... 5  
Sensor Setup ......................... 5  
Alarm Setup .......................... 6  
Setup Preferences .................. 7  
Intelli-Time Clock.................... 7  
Questions? Contact Customer Support at  
(877) 221-1252 or visit www.AcuRite.com.  
SAVE THIS MANUAL FOR FUTURE REFERENCE.  
 
Features & Benefits  
6 7  
13  
10  
21  
14 15 16 17  
180º  
CHARGE  
USB DEVICE  
DC 5 v  
8 9  
11 12  
22  
23 19  
20  
18  
FRONT OF ALARM  
6. Projector Power On/Off  
7. Flip Projection 180  
C/ F Switch  
15. ˚ ˚  
Select degrees Celsius or degrees  
Fahrenheit temperature units.  
˚
for versatile viewing angles.  
16. Zone Button  
Set time zone preference.  
8. Projection Information  
Toggle between time, indoor  
17. RESET Button  
temperature or outdoor temperature  
Full reset to factory defaults.  
9. Projection Color  
18. Projector Focus  
Toggle between red or amber.  
Adjust the size and focus of the  
projected image.  
10. UP, SET & DOWN Buttons  
for setup preferences.  
19. DC 5v Power Input  
11. Alarm Setup  
20. USB Charging  
for compatible smartphones.  
12. Alarm On/Off Button  
13. Snooze Button  
21. + Brightness Button  
Increase display brightness.  
22. — Brightness Button  
BACK OF ALARM  
Decrease display brightness.  
14. A-B-C Switch  
23. Battery Compartment  
ID code that must match sensor’s  
A-B-C switch to ensure units  
synchronize.  
24. Battery Compartment Cover  
(not shown)  
3
 
Features & Benefits  
2
1
3
4
5
6
7
8
®
1. Current Indoor Temperature  
Arrow icon indicates direction  
temperature is trending.  
4. Intelli-Time Date  
Pre-programmed to the correct date.  
5. Moon Phase  
2. Current Outdoor Temperature  
Arrow icon indicates direction  
temperature is trending.  
6. Alarm On/Off  
7. Alarm Set Time  
®
8. Alarm Days Active  
Indicates daily alarm or  
weekday-only alarm setup.  
3. Intelli-Time Clock  
Pre-programmed to the correct  
time and automatically updates for  
Daylight Saving Time.  
4
 
SETUP  
Sensor Setup  
conditions. Cold temperatures can  
cause alkaline batteries to function  
improperly. Use lithium batteries in  
the sensor for temperatures below  
-4ºF / -20ºC.  
Set the A-B-C Switch  
1
The A-B-C switch is located inside  
the battery compartment. It can  
be set to A, B or C. However,  
you must select the same letter  
choices for both the sensor and the  
display unit in order for the units to  
synchronize.  
1. Slide off the battery  
compartment cover. Take note  
of the A-B-C switch setting inside  
the battery compartment for  
display unit setup.  
Install or Replace Batteries  
2
AcuRite recommends high quality  
alkaline or lithium batteries for the  
best product performance. Heavy  
duty or rechargeable batteries are  
not recommended.  
2. Insert 2 x AA batteries into  
the battery compartment, as  
shown. Follow the polarity  
(+/-) diagram in the battery  
compartment.  
The sensor requires lithium  
batteries in low temperature  
3. Replace the battery cover.  
A-B-C Switch  
1
set to match  
display unit  
A B C  
Install Batteries  
2 AA batteries  
2
5
 
Alarm Clock Setup  
Set the A-B-C Switch  
Install or Replace Backup  
Batteries  
1
3
Locate the A-B-C switch inside  
the battery compartment. Set  
the A-B-C switch to A, B or C.  
You must select the same letter  
choices for both the display unit  
and the sensor in order for the  
units to synchronize.  
1. Remove the battery  
compartment cover.  
2. Insert 3 x AA alkaline  
batteries into the battery  
compartment, as shown.  
Follow the polarity  
(+/-) diagram in the battery  
compartment.  
2
1
Plug in Power Adapter  
For the best performance, plug  
in the power adapter as the main  
power source for this product.  
3. Replace the battery cover.  
A-B-C Switch  
set to match  
sensor  
A B C  
Install  
3
Batteries  
Plug in Power  
Adapter  
2
3 AA alkaline  
batteries  
CHARGE  
USB DEVICE  
DC 5 v  
IMPORTANT: Batteries are a backup power source to preserve records in the event of a  
power outage. Power adapter recommended as the primary power source to enjoy the full  
functionality of the product.  
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE  
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.  
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be  
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used  
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,  
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge  
non-rechargeable batteries. DO NOT short-circuit the supply terminals.  
6
 
®
Intelli-Time Clock  
Intelli-Time clock and calendar are pre-programmed to the correct time and  
date, and update automatically for Daylight Saving Time. All you need to do is  
select your time zone using the “ZONE” button.  
Set the Time, Date & Language  
Press and hold the “ ” button, located on the right side of the display, to  
enter SET MODE. Once in set mode, the preference you are currently setting  
will blink on the display.  
To adjust the currently selected (flashing) item, press and release the “ ” or  
“ buttons (press and HOLD to fast adjust).  
To save your adjustments, press and release the “ ” button to adjust the next  
preference. The preference set order is as follows:  
LANGUAGE (English or French)  
TIME ZONE (PST MST CST EST AST HAST AKST)  
AUTO DST (Automatically adjust time -/+ on DST dates)  
CLOCK HOUR  
CLOCK MINUTE  
CALENDAR MONTH  
CALENDAR DATE  
CALENDAR YEAR  
You will automatically exit SET MODE if no buttons are pressed for 5 seconds.  
Enter setup mode at any time by pressing the “ ” button.  
Manual Clock Quick-Adjust  
Self-timed clocks may drift by a few minutes over time. You can adjust the time  
using the “Quick Adjust” feature.  
To access “Quick Adjust” mode, press AND HOLD the “ ” OR “ ” buttons  
for at least 8 seconds. The minutes will flash to indicate they can be adjusted.  
Press the “ ” or “ ” buttons to adjust the minutes. After 3 seconds of  
inactivity, any adjustments will be saved and the clock will return to normal  
operation.  
7
 
Placement for Maximum Accuracy  
AcuRite sensors are sensitive to surrounding environmental conditions. Proper  
placement of both the display unit and outdoor sensor are critical to the  
accuracy and performance of this product.  
Alarm Clock Placement  
Place alarm clock in a dry area free of dirt and dust. To help ensure  
an accurate indoor temperature measurement, be sure to place the  
display away from heat sources or vents.  
Outdoor Sensor Placement  
Sensor must be placed outside to observe outdoor conditions.  
Sensor is water resistant and is designed for general outdoor use,  
however, to extend its life place the sensor in an area protected  
from direct weather elements.  
Hang the sensor using the integrated hang holes or hanger, or by  
using string (not included) to hang it from a suitable location, like a  
well covered tree branch. The best location is 4 to 8 feet above the  
ground with permanent shade and plenty of fresh air to circulate  
around the sensor.  
Important Placement Guidelines  
• To ensure accurate temperature measurement, place units out of direct  
sunlight and away from any heat sources or vents.  
• Display unit and outdoor sensor must be within 330 ft (100 m) of each other.  
• To maximize wireless range, place units away from large metallic items, thick  
walls, metal surfaces, or other objects that may limit wireless communication.  
• To prevent wireless interference, place both units at least 3 ft (.9 m) away  
from electronic devices (TV, computer, microwave, radio, etc.).  
AT  
LEAST  
TV  
3
(.91 m)  
APART  
(330 feet maximum)  
(100 meters)  
Setup is Complete  
The sensor will now synchronize with the alarm clock. It may take a few  
minutes for synchronization to complete.  
8
 
OPERATION  
Using the Alarm Clock  
Set Alarm Time  
Press and release the “  
” button to enter ALARM SET MODE.  
To adjust the currently selected (flashing) item, press and release the “ ” or  
“ buttons (press and HOLD to fast adjust).  
To save your adjustments, press and release the “  
preference. The preference set order is as follows:  
” button to adjust the next  
ALARM CLOCK HOUR  
ALARM CLOCK MINUTE  
ALARM EVERY DAY or WEEKDAY ONLY SELECTION  
You will automatically exit ALARM SET MODE if no buttons are pressed for 5  
seconds. Enter setup mode at any time by pressing the “  
” button.  
Momentary Backlight  
During power adapter use, press the Snooze button for momentary backlight  
at 100% brightness. During battery-powered use, press any button for  
momentary backlight.  
Moon Phase  
Track the phases of the moon, conveyed through simple lunar phase icons.  
NEW  
WAXING  
CRESCENT  
1ST  
QUARTER  
WAXING  
GIBBOUS  
FULL  
WANING  
GIBBOUS  
3RD  
QUARTER  
WANING  
CRESCENT  
USB Charging  
Charge your mobile device by plugging your device’s  
USB power cord (not included) into the USB charging  
port on the back of the alarm clock.  
CHARGE  
USB DEVICE  
DC 4.5  
v
USB charging is only available during power adapter  
use; USB charging is not active when operating on  
battery-power only.  
Note: Follow the manufacturer’s instructions for your mobile  
device(s) to determine compatibility with the USB charging  
feature on this product. Some devices may not support USB  
charging or may require a higher power rating than this product provides.  
Observe the charging status on your device. Ensure your device is working  
properly before attempting to charge.  
9
 
Using The Projector  
The projector can be rotated to project the time, indoor temperature, or  
outdoor temperature on a wall or on the ceiling.  
Press the projector power button “ ” to turn the projector ON/OFF.  
Press the “  
or wall.  
” button to flip the projection image 180º for use on a ceiling  
Press the “ “ button, located on the left side of the display, to select the  
information you want to be projected:  
CURRENT TIME  
INDOOR TEMPERATURE (  
)
OUTDOOR TEMPERATURE ( )  
Press the color selection button (  
projection.  
) to choose between a RED or AMBER  
If the projected information is hard to read or blurry, use the “FOCUS” dial on  
the back of the projector to make the projected image clearer.  
NOTES:  
• Do not stare into the projector lens directly!  
• Do not touch the projector lens.  
• Some rough surfaces will not display the projection clearly.  
Display Backlight  
Display backlight has 6 brightness levels: 100% (default), 70%, 50%, 30%,  
10% and 5%. The backlight will be ON 100% intensity by default, you may  
adjust the backlight using the dimmer control buttons located on the back of  
the unit.  
BATTERY POWER NOTE: The display unit is intended to be plugged in during  
use with included AC power adaptor; batteries are optional for maintaining  
settings in case of a power outage. Please note that to conserve backup  
battery power, the projector and display illumination only activate momentarily  
for 10 seconds at a time when the unit is powered by batteries alone. The  
display dimmer option is only available when the unit is plugged in.  
10  
 
Troubleshooting  
If the wireless signal indicator shows no bars:  
• Relocate the display unit and/or the outdoor sensor.  
The units must be within 330 ft (100 m) of each other.  
• Make sure both units are placed at least 3 feet (.9  
m) away from electronics that may interfere with the  
wireless communication (such as TVs, microwaves,  
computers, etc).  
No outdoor sensor  
reception  
no bars  
• Use standard alkaline batteries (or lithium batteries in  
sensor when temperature is below -4ºF/-20ºC). Do not  
use heavy duty or rechargeable batteries. NOTE: It  
may take up to 20 minutes for display unit and sensor  
to synchronize after batteries are replaced.  
• Verify power adapter is plugged in.  
• Increase brightness using +/– buttons, located on the  
back of the clock.  
• The optimum viewing angle for this product is from  
slightly above it.  
Alarm clock display  
seems dark or hard to  
read  
• Check that the batteries are installed correctly.  
Batteries may need to be replaced.  
• Reset the display by pressing the reset button, located  
on the back of the display unit. Time and date will  
need to be entered after a reset.  
Alarm clock screen not  
working  
• Make sure both the display unit and sensor are  
placed out of direct sunlight and away from any heat  
sources or vents (see page 8).  
Inaccurate  
temperature  
Flashing of the outdoor temperature is generally an  
indication of wireless interference.  
1. Bring both the sensor and display unit indoors and  
remove at least one battery from each.  
2. Make sure the A-B-C switch on both units match.  
3. Reinstall the battery in the outdoor sensor.  
4. Reinstall the battery in the display unit.  
Outdoor  
temperature  
is flashing or  
showing dashes  
5. Let the units sit within a couple feet of each other  
for about 20 minutes to gain a strong connection.  
If your AcuRite product does not operate properly after trying  
(877) 221-1252 for assistance.  
11  
 
Care & Maintenance  
Display Unit Care  
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep  
away from dust, dirt and moisture. Clean ventilation ports regularly with a  
gentle puff of air.  
Outdoor Sensor Care  
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.  
Replace Intelli-Time Clock Battery  
Intelli-Time technology is  
powered by a pre-installed  
CR2032  
3V  
coin-cell battery that stores  
the time and date settings.  
The battery has a shelf life of  
several years. To replace the  
Intelli-Time battery:  
1. Locate the coin cell battery  
compartment door on the  
back of the display unit.  
Unscrew and remove the  
compartment cover.  
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown.  
Install battery with “+” positive terminal facing OUT.  
3. Screw in the battery cover.  
12  
 
Specifications  
Outdoor: -40ºF to 158ºF; -40ºC to 70ºC  
Indoor: 32ºF to 99ºF; 0ºC to 37ºC  
330 ft / 100 m depending on home construction materials  
433 MHz  
TEMPERATURE RANGE  
WIRELESS RANGE  
OPERATING FREQUENCY  
POWER  
Display: 5v power adapter  
3 x AA alkaline batteries (optional)  
Sensor: 2 x AA alkaline or lithium batteries  
Outdoor data: 16 second updates  
Indoor data: 60 second updates  
DATA REPORTING  
FCC Information  
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:  
1- This device may NOT cause harmful interference, and  
2- This device must accept any interference received, including interference that may cause undesired operation.  
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-  
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and the receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.  
Such modifications could void the user authority to operate the equipment.  
This device complies with Industry Canada licence-exempt RSS standard(s).  
Operation is subject to the following two conditions:  
(1) This device may not cause interference, and  
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.  
13  
 
Customer Support  
AcuRite customer support is committed to providing you with best-in-  
class service. For assistance, please have the model number of this  
product available and contact us in any of the following ways:  
(877) 221-1252  
24/7 support at www.AcuRite.com  
Installation Videos  
Instruction Manuals  
Replacement Parts  
Register your Product  
Support User Forum  
Submit Feedback & Ideas  
PRODUCT MUST BE REGISTERED  
TO RECEIVE WARRANTY SERVICE  
IMPORTANT  
PRODUCT REGISTRATION  
Register online  
to receive 1 year  
warranty protection  
Register a Product  
www.AcuRite.com  
Limited One Year Warranty  
warranty will not be breached, and Chaney will give no credit  
for products it manufactures which have received normal wear  
and tear, been damaged (including by acts of nature), tampered,  
abused, improperly installed, damaged in shipping, or repaired  
or altered by others than authorized representatives of Chaney.  
At AcuRite, we proudly uphold our commitment  
to quality technology. Chaney Instrument Co.  
warrants that all products it manufactures to  
be of good material and workmanship, and to  
be free of defects when properly installed and  
operated for a period of one year from the date  
of purchase.  
The above-described warranty is expressly in lieu of all other  
warranties, express or implied, and all other warranties are  
hereby expressly disclaimed, including without limitation the  
implied warranty of merchantability and the implied warranty  
of fitness for a particular purpose. Chaney expressly disclaims  
all liability for special, consequential or incidental damages,  
whether arising in tort or by contract from any breach of this  
warranty. Some states do not allow the exclusion or limitation  
of incidental or consequential damages, so the above limitation  
or exclusion may not apply to you. Chaney further disclaims all  
liability from personal injury relating to its products to the extent  
permitted by law. By acceptance of any of Chaney’s products,  
the purchaser assumes all liability for the consequences arising  
from their use or misuse. No person, firm or corporation is  
authorized to assume for Chaney any other liability in connection  
with the sale of its products. Furthermore, no person, firm or  
corporation is authorized to modify or waive the terms of this  
paragraph, and the preceding paragraph, unless done in writing  
and signed by a duly authorized agent of Chaney. This warranty  
gives you specific legal rights, and you may also have other  
rights which vary from state to state.  
We recommend that you visit us at  
your product. However, product registration  
does not eliminate the need to retain your  
original proof of purchase in order to obtain  
warranty benefits.  
Chaney Instrument Co. warrants that all products it manufactures  
to be of good material and workmanship, and to be free of  
defects when properly installed and operated for a period of  
one year from the date of purchase. Remedy for breach of this  
warranty is limited to repair or replacement of the defective  
item(s). Any product which, under normal use and service, is  
proven to breach the warranty contained herein within ONE  
YEAR from date of sale will, upon examination by Chaney,  
and at its sole option, be repaired or replaced by Chaney.  
Transportation costs and charges for returned goods shall  
be paid for by the purchaser. Chaney hereby disclaims all  
responsibility for such transportation costs and charges. This  
For in-warranty claims: Chaney Instrument Co.  
965 Wells St., Lake Geneva, WI 53147  
14  
 
15  
 
Weather  
Stations  
Temperature  
& Humidity  
Weather  
Alert Radio  
Kitchen  
Thermometers  
& Timers  
Clocks  
AcuRite offers an extensive assortment of precision instruments,  
designed to provide you with information you can depend on to  
Plan your day with confidence.  
www.AcuRite.com  
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of  
the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-  
rights are the property of their respective owners. AcuRite uses patented technology.  
Printed in China  
13020 INST 112713  
 

2Wire Tablet 78 13885 03 User Manual
Abocom Switch SW1600B User Manual
Acoustic Research Headphones ARE05 User Manual
Air King Fan 9025 User Manual
Aiwa CRT Television TV F2000u TV F2400u User Manual
Aiwa Stereo Receiver AV DV500 User Manual
Allied Telesis Switch at 8116 User Manual
Aluratek Digital Photo Frame ADMPF114F User Manual
ATN Inc Binoculars ATN PS 22 User Manual
Audiovox Car Stereo System AVD400T User Manual