ITEM NO. _______________________
500-S SERIES
LOW TEMPERATURE HOT HOLDING CABINETS
G
HALO HEAT…a controlled, uniform heat source that gently
surrounds food for better appearance, taste, and longer holding life.
G
G
Holds hot food hot...meat, poultry, fish, potatoes, casseroles, vegetables,
rolls, etc.
Close temperature tolerance and even heat application maintain ideal
serving temperatures throughout the cabinet.
G
G
G
G
Non-magnetic stainless steel interior resists corrosion.
Available in reach-in or pass-through design.
Casters provide easy mobility.
Can be stacked with an identical unit or cook/hold oven to save space.
Antimicrobial handle retards the growth of illness-causing pathogens.
G
Single compartment holding cabinet with 22 gauge stainless steel door. The cabinet includes one (1) ON/OFF power
switch, one (1) adjustable temperature knob with a temperature range of 60° to 200°F (16° to 93°C); one (1) indicator
light; and one (1) digital display. Included are two (2) chrome plated side racks (230V models use stainless steel) with
eleven (11) pan positions spaced at 1-3/8" (35mm) centers, two chrome plated wire shelves, and one (1) set
of 3-1/2" (89mm) heavy duty casters – 2 rigid and 2 swivel with brake.
I
I
MODEL 500-S/STD: Holding cabinet with a .040" stucco aluminum exterior casing.
MODEL 500-S/HD: Holding cabinet with heavy duty 20 gauge stainless steel exterior casing.
ELECTRONIC CONTROL OPTION
I Solid state electronic control option simplifies temperature setting and
has a clear, easy-to-read LED display and includes our patented
SureTemp™ heat recovery system. SureTemp™ reacts immediately to
compensate for any loss of heat whenever the door is opened.
1
2
3
4
5
6
I Electronic control is also available with six independent multiple timers
for each compartment to facilitate “first-in, first-out” concept.
FACTORY INSTALLED OPTIONS
Reach-in compartment is standard.
I ¯ Specify pass-through doors as a
special order. Pass-through cabinets
cannot have all doors hinged on the
same side.
ADDITIONAL FEATURES
G
G
Optional HACCP Documentation web-based
software provides the ability to monitor,
store, and print all relevant data.
Optional HACCP with Kitchen Management
web-based software provides the ability to
program, control, monitor, and store all
relevant data.
ANSI/NSF 4
G
G
Right-hand door swing is standard.
I ¯ Specify left-hand door as a
G
special order.
Stackable Design
¯ 500-S with 500-S holding cabinet,
500-TH-II or 500-TH/III cook/hold oven.
Order appropriate stacking hardware.
Indicate top and bottom placement.
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
P R I N T E D I N U .S .A .
D U E TO O N G O I N G P R O D U C T I M P R O V E M E N T, S P E C I F I C AT I O N S A R E S U B J E C T TO C H A N G E W I T H O U T N O T I C E .
#23 - 01/09
|
ABC Office Home Security System 06502 User Manual
Acer Cell Phone F900 User Manual
Addlogix Power Supply RPS14 User Manual
Addonics Technologies Computer Drive AEPUDDSA User Manual
Air King Ventilation Hood Inline User Manual
Allied Telesis Network Card AT 2872SX User Manual
Allied Telesis Switch AT GS900 16 V2 User Manual
Avery Door 6032 User Manual
Aviom Music Mixer 6416M User Manual
Azden Digital Camera 305UPR User Manual